Texas Instruments (TUSB2036VF) USB Interface, USB Hub Controller
USB 2.0, 3 V, 3.6 V, LQFP, 32 Pins
Takealot · checked 3 days ago
- Average
- R 1 115.00
- Lowest seen
- R 1 115.00
- Highest seen
- R 1 115.00
- Last change
- R 0.00
- First indexed
- 22 Sep 2026
- Retailer
- Takealot
Description
Product Overview
The TUSB2036VF is a 3-port Hub that provides up to three downstream ports in compliance with the USB 2.0 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. The downstream ports support both full-speed and low-speed devices by automatically setting the slew rate according to the speed of the device attached to the ports. The configuration of the BUSPWR pin selects either the bus-powered or the self-powered mode. The introduction of the DP0 pull-up resistor disable pin, DP0PUR, makes it much easier to implement an onboard bus/self-power dynamic-switching circuitry. With the new function pin, the end-equipment vendor can reduce the total board cost while adding additional product value. The TUSB2036 supports both bus-powered and self-powered modes.
Integrated USB transceivers
3.3V Low power ASIC logic
One upstream port and 3 programmable downstream ports
Two power source modes (self-powered mode, bus-powered mode)
All downstream ports support full-speed and low-speed operations
Power switching and over-current reporting is provided ganged or per port
Supports suspend and resume operations
Suspend status pin available for external logic power down
3-state EEPROM interface allows EEPROM sharing
Push-pull outputs for PWRON eliminate the need for external pull-up resistors
Noise filtering on OVRCUR provides immunity to voltage spikes
Supports 6MHz operation through a crystal input or a 48MHz input clock
No special driver requirements
Green product and no Sb/Br
Applications
Computers & Computer Peripherals, Consumer Electronics
Product Information
USB IC Type: USB Hub Controller
USB Standard: USB 2.0
Supply Voltage Min: 3V
Supply Voltage Max: 3.6V
Interface Case Style: LQFP
No. of Pins: 32Pins
Data Rate: 12Mbps
No. of Ports: 3 Port
Operating Temperature Min: 0°C
Operating Temperature Max: 70°C
Product Range: -
MSL: MSL 3 - 168 hours
What's in the box
1 x Texas Instruments (TUSB2036VF) USB Interface