TG KW 450 Car Diagnostic Scanner Tool

Konnwei kw450 is for Volkswagen series and OBD II vehicles. You can test all vehicles under vag. It supports KWP, TP-CAN, UDS, OBD 2 protocols. It is small in size, light in weight, easy to use, widely used, fast data acquisition speed, I believe you will like it. kw450 full system diagnostic scanner can work on 101 system on ECU of vag series cars such as Jetta / Bora / Santana / Suteng / mailing / golf / beetle / Tiguan / Touareg / Passat / Fabia / Octavia / superb etc.
KW450 is Engine/Transmission/ABS/SRS full system for vw/audi/skoda/seat.
It is also for most OBD2 vehicles by OBDII diagnostic.

KONNWEI KW450 OBDII Specification:
Item name: KW450 car obd2 scanner
Display: 2.8inch TFT colour screen
Operating Temperature: 0 to 60 ºC(32 to 140 ºF)
Storage Temperature: -20 to 70 ºC (-4 to 158 ºF)
Power:8 to 18 V provided via vehicle
Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
Weight: 0.8KG
Size: 20cm (7.68'') x 10cm (3.94'') x 3.5cm (1.38'')
Function: Read/Erase fault codes
Special function: I/M Readiness, Data Stream, Freeze Frame...
Housing material: ABS
Colour: blue

Konnwei Kw450 Engine/Transmission/ABS/SRS Full System OBD2 Scanner for VW
KW450 OBD Functions and Features :
Read Codes
This option is used to identify which section of the emission control system has malfunctioned.
Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can use this function to erase the codes from the vehicle. Before performing this function, please be sure the vehicle's ignition key is in the ON position with the engine off.
Live Data
This option retrieves and displays live data and parameters from the vehicle's ECU.
View Freeze Frame
When an emission-related fault occurs, certain vehicle conditions are recorded by the onboard computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness
O2 Monitor Test
The results of the O2 sensor test are not live values but instead the results of the ECU's last O2 sensor test, for live O2 sensor readings.
On-Board Monitor Test
This function can be utilized to read the results of onboard diagnostic monitoring tests for specific components/systems.
Component Test
Vehicle Info
This option displays the vehicle information, such as VIN(Vehicle Identification Number), CID(Calibration ID) and CVN(Calibration Verification Number).
BAT Check
Modules Present
This option displays the vehicle communication protocol type.
DTC Lookup
In this option, you can enter the fault code and view the detailed description.
Review Data
This option can replay failures that store records.
Print Data
This option can upload the stored fault code to the computer.
OilReset
This function allows you to perform a reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.
EPBReset
DPF
SAS
Injector Coding
Functions performed after replacing the fuel injector
generating a new code for a reconditioned injector.
The injector is replaced
Throttle Match
Suspension
Lamp adjusts

Konnwei Kw450 Engine/Transmission/ABS/SRS Full System OBD2 Scanner for VW
Top 5 Reasons to Choose KW450 vag OBD 2 Scanner
Support languages: English, German
Konnwei Kw450 Engine/Transmission/ABS/SRS Full System OBD2 Scanner for VW
2.8-inch screen, easy to use
Apply for all VW series of cars.
Lifetime free update & Data printing
One-click I/M readiness key to read your car's situation immediately

KW450 diagnostic tools Support Vehicles:
It is for a full system for VW/AUDI/SEAT/SKODA. The scan tool is specially designed to work with all OBD II compliant vehicles, including control area network (CAN), it is required by EPA that all 1996 and newer vehicles (Cars and light trucks) sold in the united states must be OBD II compliant and this includes all American, Asian and European vehicles.
Konnwei Kw450 Engine/Transmission/ABS/SRS Full System OBD2 Scanner for VW
KW450 diagnostic Lifetime Free Update software:
Please press the scanner and hold, then connect the scanner to PC with USB cable included in the package, the screen will be turned to "UPDATE MODE"

Notice:
Please turn off anti-virus software when installing the update tool, otherwise, it will not be able to install the driver properly. the Update tool can be found from the official website (refer to user manual)
download and Install the "uplink" program to your PC( Windows XP- 7 only), you will find the below page, All you need is one click, the program will search the update from our server, download and upgrade it by itself. No need for any other operation, save time and money.
Wait for the update process finished, the scanner KW850 will be ready to go! we will update to the latest version before shipping out, normally there is no need to update for a long while.
Konnwei Kw450 Engine/Transmission/ABS/SRS Full System OBD2 Scanner for VW
KW450 Car Diagnostic Scanner How To Print:
After installing the "uplink" program on the PC, connect the scanner to the PC with a USB cable. (No need to press any buttons)
Launch the program "uplink", Select "Print" option.
Operation on the scanner: go to the main menu, select " Print Data"; Select the data option that you want to print to PC,
After selecting the "print data", the data stream that is stored in the scanner will be sent to PC software, you may modify them before printing them out from the PC's printer.

What's in the box
1xTG KW 450 Car Diagnostic scanner tool