Tile Levelling System | 3mm Clips, Wedges & Plier Wall & Floor Tiling

1.The disposable 3mm spacers clips are asuitable for 300x600, 600x600, and 600x1200 tiles.

Place it between two tiles, leaving an even gap, and use the reusable wedges and pliers to fix and clamp it. Once the cement and tiles are firmly in place, use a hammer to break off the upper part of the base.

2.Reusable wedges

The red wedges are used to secure the base and tiles, greatly improving tile flatness and preventing tile movement.

3.Effortless push plier

Push the wedges and clips firmly to secure them, making them flexible, effortless, and comfortable to use.

Install Instructions

1.Insert white base clips under tile edges during installation.

2.After positioning tiles, insert red wedges into clips and tighten with pliers to keep tiles level. 3.After tile adhesive cures (at least 24 hours), knock off wedge tops with a rubber mallet or remove wedges with pliers. Clip remains break off easily without affecting grouting.

What's in the box
1 x Plier
1 x Pack Reusable Wedges
2 x Packs 3mm Clips