Tork Craft - Polishing Bonnet Wool Hook And Loop

hook and loop polishing wool buff Diameter: Ø180mm Use backing pad: SPC00119 Application: The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with hook and loop. Make sure the diameter of the polishing buff is the same as the backing pad's diameter. It is necessary to polish a vehicle body panel when: - The panel has been newly painted with a clear-coat. - Shallow scratch marks need to be removed. - The panel has suffered from oxidation. - Swirl marks and hologram defects need to be removed. The buff is washable after use if the polishing compound is soluble. hook and loop polishing wool buff range: ORDER NO. DIAMETER USE BACKING PAD SPC00123 ø125mm SPC00120 SPC00125 ø180mm SPC00119 Recommended polishing compounds to use: - Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces. - Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks. - Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step