TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE

HARDWARE FEATURES

Processor

Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc

Memory

64MB DDR2 RAM, 8MB Flash

Interface

1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)

1 Grounding Terminal

1 Reset Button

Power Supply

Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)

Voltage range: 16-27VDC

Max. Power Consumption 9.8 Watts Max

Note:

When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.

Dimensions ( W x D x H ) 224 x 79 x 60 mm

Antenna Built-in 13dBi 2x2 Dual-polarized Directional Antenna

Beam Width: 45 (H-Plane) / 45 (E-Plane)

Note:

For more details, please refer to datasheet

Protection 15KV ESD Protection

6KV Lightning Protection

Enclosure Outdoor ASA stabilized plastic material

IPX5 waterproof Certification

WIRELESS FEATURES

Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled)

Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)

Wireless Speeds Up to 300Mbps (40MHz,Dynamic)

Up to 144.4Mbps (20MHz,Dynamic)

Up to 72.2Mbps (10MHz,Dynamic)

Up to 36.1Mbps (5MHz,Dynamic)

Frequency 5.15~5.85GHz

Note:

Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.

Transmission Power 26dBm/398mw (Adjustable power by 1dBm)

Note:

Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURES

Wireless Configurations Pharos MAXtream TDMA Technology

802.11a/n Modes

Selectable Channel Width: 5/10/20/40MHz

Automatic Channel Selection

Transmission Power Control

Dynamic Frequency Selection (DFS)

WDS Enable/Disable

Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption

SSID Broadcast Enable/Disable

Multi-SSID with VLAN Tagging (AP mode only)

Distance/ACK Timeout Setting

Wireless MAC Address Filter

Wireless Advanced:

> Beacon Interval/RTS Threshold/Fragmentation

>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Management Features Discovery and Remote Management via Pharos Control application

HTTP/HTTPS Web-based management

System Log

SNMP Agent(v2c)

Ping Watch Dog

Dynamic DDNS

SSH Server

System Tools Wireless Signal Quality Indicators:

Signal Strength/Noise/Transmit CCQ/CPU/Memory

Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP

Spectrum Analyzer

Speed Test

Ping

Traceroute

System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications

Hardware watch dog

POE ADAPTER FEATURES

Dimensions(W x D x H) 85.8×43.9×29.7 mm

Interfaces 1 AC Jack with Earth Ground

1 10/100Mbps Shielded Ethernet Port (Power + Data)

1 10/100Mbps Shielded Ethernet Port (Data)

Button Remote Reset Button

Power Status LEDs Green

Input 100-240VAC, 50/60Hz

Output 24VDC, 0.5A Max

+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

Efficiency >80%

Certifications CE/FCC/UL/IC/GS/PSB/SAA/S-Mark/KC-mark

OTHERS

Certification CE, FCC, RoHS, IPX5

Package Content

Outdoor Wireless CPE

24V 0.5A Passive PoE Adapter

Pole Mounting Straps

AC Power Cord

Installation Guide

System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.

Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

Environment Operating Temperature: -40 ~70 (-40 ~158 )

Storage Temperature: -40 ~70 (-40 ~158 )

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~95% non-condensing

What's in the box
1 x Outdoor Wireless CPE510 (with connector ports cover)
1 x 24V/1A Passive PoE Adapter (with mounting screw plate)
1 x Pole Mounting Straps,
1 x AC Power Cord
1 x Installation Guide