
Ubiquiti UISP WaveFiber ONU SC/APC 2.5Gbps Ethernet GPON Optical Network Media Converter 20-pack Wave-Fiber-ONU-20
R 17 699.00
FirstShop · checked Today
- Average
- R 17 699.00
- Lowest seen
- R 17 699.00
- Highest seen
- R 17 699.00
- Last change
- R 0.00
- First indexed
- 15 Sep 2026
- Retailer
- FirstShop
Description
Ubiquiti UISP WaveFiber ONU SC/APC 2.5Gbps Ethernet GPON Optical Network Media Converter 20-pack Wave-Fiber-ONU-20 A GPON optical network unit with a 2.5 GbE port that delivers 1.2 Gbps uplink / 2.5 Gbps downlink speeds at distances up to 20 km. Note: A PoE adapter is included only with single-unit purchases. Technical Specifications: General Dimensions: 76.5 × 76.5 × 26.4 mm Weight: 78 g Enclosure Material: Polycarbonate Mounting: Desktop, Wall Mount Hardware Networking Interface: (1) SC/APC ITU-G.984 GPON WAN Port (1) 1/2.5 GbE RJ45 LAN Port Management Interface: Ethernet In-Band Button: (1) Factory Reset Power Power Method: PoE, 0.3 A Power Supply: 24 V Passive PoE 2-Pair (4, 5+; 7, 8-) Supported Voltage Range: 20 to 28 V DC Maximum Power Consumption: 5 W PON Downstream Rate: 2.488 Gbps Upstream Rate: 1.244 Gbps Optical Module TX Range: 1.5 to 5 dBm Optical Module RX Range: -8 to -28 dBm Fiber Operating Wavelength TX: 1310 nm Operating Wavelength RX: 1490 nm Line Code: Scrambled NRZ Optical Interface Nominal Bit Rate Downstream: 2488.32 Mbit/s Optical Interface Nominal Bit Rate Upstream: 1244.16 Mbit/s Physical Reach: 20 km Software Mode: ONU/ONT Layer 2/3 Ethernet Switch Services: Web Server, Telnet, NAT, Bridging and Routing, Firewall Features, Application Passthrough Features Utilities: Dashboard, Monitoring, Alarms, Logs Security: GEM Port Encryption Other Features: Remote Reset, Remote Reboot, Remote Firmware Upgrade, VLAN Support Environmental Operating Temperature: -15°C to 45°C Operating Humidity: 10% to 90% Non-Condensing LED Indicators PON Status: All Off: Bootup 1 × Red: Signal Too Low (< -28 dB) 1 × White: Signal Low (≥ -28 dB) 2 × White: Signal Good (≥ -25 dB) 3 × White: Signal Strong (≥ -11 dB) 1 × Red + 2 × White: Signal Too Strong (≥ -8 dB) 3 × Red: No Signal Alternating Red and Signal Strength Indicator: No Authority Ethernet Status: Steady White: Link Up Blinking White: Activity Off: Link Down Power Status: White: On Certifications Certifications: FCC, IC, CE