UNO R3 SMD Development Board CH340 Chipset With Cable
USB Connection Programming
Takealot · checked 2 days ago
7 offers · 1 retailers
Listed under the same model number
No barcode ties these listings together, so no saving is claimed. See the listings
Matched by model number; no shared barcode
- Average
- R 209.00
- Lowest seen
- R 209.00
- Highest seen
- R 209.00
- Last change
- R 0.00
- First indexed
- 23 Sep 2026
- Retailer
- Takealot
- View
R 114.00
- View
R 190.00
+R 76.00
Takealot This listing
UNO R3 SMD Development Board CH340 Chipset With Cable
Checked 2 days ago
ViewR 209.00
+R 95.00
- View
R 243.00
+R 129.00
- View
R 257.00
+R 143.00
- View
R 489.00
+R 375.00
- View
R 648.00
+R 534.00
Each price is from PriceFind's last check of that retailer. Follow the link for the live price.
Description
The Uno R3, powered by the CH340 USB chipset, is compatible with the latest R3 version of the Uno, a popular hobbyist development board. It uses an SMD microprocessor instead of the older DIP package found on the original, and offers several additional features.
The Uno R3 CH340 operates from a 5V supply and can be powered by either an external power supply or a USB port. If both power sources are available, the system automatically selects the power source. If using an external power supply, a power supply between 7 and 12V is recommended. Higher input voltages can overload the onboard voltage regulator and may cause it to overheat.
A key feature of this version of the board is that, in addition to the standard female headers for I/O, each female header has a row of holes next to it for soldering male headers, a second row of female headers, or even wires. These holes can be soldered to either the top or bottom of the board. The board comes with a row of male headers, typically soldered to the top of the board, as shown. Soldering the headers to the bottom of the board prevents direct mounting on a breadboard, as the header spacing on one side is not 0.1 on center, and the holes are offset significantly from side to side.
The board also features a series of solder points, providing convenient alternative access to I2C (SCL/SDA), serial (TX/RC), 3.3V, 5V, and GND.
Like all Arduino-compatible boards, it can be programmed using the Arduino IDE via USB.
Quick Specs
Microcontroller: ATmega328P
USB Chipset: CH340
Input Voltage: 7-12V
Logic Level: 5V
Input Voltage: 7-12V
Digital I/O Pins: 14
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current per 3.3V Pin: 50 mA
Flash Memory: 32 KB
SRAM: 2 KB
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHz
Specifications
Package Dimensions: 13cm x 8cm x 2cm
Weight: 0.1kg
Material: PCB
Note:
Please allow slight color difference due to light and screen settings.
Please allow slight size difference due to manual measurement.
What's in the box
1 x Cable
1 X UNO R3 SMD Development Board
