Victron BlueSolar PWM Charge Controller 12/24V-10A

Features:

- Load output with low battery voltage disconnect function.

- Three stage battery charging (bulk, absorption, float), not programmable.

- Load output protected against overload and short circuit.

- Internal protection against reverse polarity connection of the solar array and/or battery.

- Built-in lighting control function, one timer only.

Day/night timing options:

See manual for details

Specifications:

- Battery Voltage: 12/24 V with automatic system voltage detection

- Rated Charge Current Max:10A

- Automatic load disconnect: Yes

- Maximum solar voltage: 28V / 55V (1)

- Self-consumption: < 10 mA

- Load output: Manual control + low voltage disconnect

- Protection: Battery reverse polarity (fuse) / Output short circuit / Over temperature

- Overload protection:

Shut down after 60 s in case of 130% load

Shut down after 5 s in case of 160% load

Short circuit: immediate shut down

- Grounding: Common positive

- Operating temp. range: -20 to +50 C (full load)

- Humidity (non-condensing): Max 95%

Battery

- Charge voltage 'absorption': 14.2V / 28,4V

- Charge voltage 'float': 13.8V / 27,6V

- Low voltage load disconnect: 11,2V / 22,4V

- Low voltage load reconnect: 12,6V / 25,2V (manual) 13,1V / 26,2V (automatic)

Enclosure

- Protection class: IP20

- Terminal size: 5 mm / AWG10

- Weight: 0.15kg

- Dimensions (h x w x d) 70 x 133 x 33,5 mm (2.8 x 5.3 x 1.3 inch)

Standards

- Safety: IEC 62109-1

- EMC: EN 61000-6-1, EN 61000-6-3, ISO 7637-2

1) For 12V use 36 cell solar panels

For 24V use 72 cell solar panels or 2x 36 cell in series

2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached.

Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.

What's in the box
1 x BlueSolar PWM Light 12/24 - 10A Charge Controller and Manual