Waveshare FT232RNL Industrial Digital Isolated USB Converter

Waveshare FT232RNL Industrial Digital Isolated USB Converter

1. The imported FT232RNL chip is adopted, and high-speed communication is stable, reliable and compatible. Support multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
2. The on-board self-recovery fuse and protection diode can ensure the stable output of current and voltage, prevent over-current and over-voltage, and improve the impact resistance
3. On-board automatic transceiver conversion circuit ensures fast and stable communication between USB terminal and different interfaces without mutual interference. Onboard TTL serial port 3.3V and 5V level conversion circuit, users can switch TTL communication level through switch
   Product type: industrial digital isolated converter; USB interface: Working level: 5V; Interface type: USB-B interface; Interface protection: 200mA self-recovery fuse, isolated output; RS232 interface: Interface type: DB9 male; Interface protection: TVS tube protection, surge and static protection; Transmission mode: point-to-point; Communication rate: 300bps~3Mbps
   RS485/422 interface: Interface type: terminal block; Direction control: the hardware automatically determines and controls the data transmission direction; Interface protection: provide 600W lightning-protection, surge and 15KV static protection (leave two 120R balance resistance jumper caps to enable)

Transmission mode: point-to-many (485 mode can connect up to 32 nodes, and repeaters are recommended for more than 16 nodes; 422 mode can connect up to 256 nodes, and repeaters are recommended for more than 16 nodes)
Communication rate: 300bps~3Mbps
TTL (UART) interface:
Working level: 3.3V/5V
Interface type: terminal block
Interface pins: TXD, RXD, GND, 5V/3.3V
Interface protection: clamping protection diode is provided to prevent overvoltage and negative pressure and impact interference
Transmission mode: point-to-point
Communication rate: 300 bps~3Mbps
indicator light:
PWR: power indicator, connected to USB, red light when voltage is detected
TXD: send indicator light, light up when data is sent from USB port
RXD: receiving indicator light, which is on when data is sent back from the device interface
Use environment:
Temperature range: - 15~70
Humidity range: 5%~95% RH
Operating system: Mac, Linux, Android, Windows 11/10/8.1/8/7
Product size: 84.3 x 78 x 24.3mm
color:Black
Material:ABS+metal

Package Contents:
1 x USB TO RS232/485/422/TTL converter
1 x Guide rail clip
1 x USB cable type A male to type B male about 1.2 meters
1 x Screwdriver

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

What's in the box
1 x USB TO RS232/485/422/TTL converter
1 x Guide rail clip
1 x USB cable type A male to type B male about 1.2 meters
1 x Screwdriver