Wireless 12V 2-Channel Relay Module With 2 RF Remote Control (433MHz)

Introducing our Wireless 12V 2-Channel Relay Module with RF Remote Control (433MHz)!

Product Features:

Wiring Type: Fixed terminal

Standby Current: <5MA

Input Power: DC10V-14V

RF Frequency: 433Mhz

Receive Sensitivity: >97dbm

Output Terminal: NO, NC, COM

RF Working Mode: Superheterodyne

Decoding Mode: MCU software decoding

Transmitting Distance: >100m (open space)

Supported Remote Types: Learning code, Fixed code (Rolling code customisable)

Working Modes: Momentary, Toggle, Latching, Time Delay (5s, 10s, 15s)

Working Modes Explained:

Momentary: Press the remote button to connect the relay; release to disconnect.

Toggle: Press once to connect the relay, press twice to disconnect.

Latching: Press button A to connect the relay, press button B to disconnect.

Time Delay Mode: Press the remote button to connect the relay; it automatically disconnects after 5s, 10s, or 15s.

Code Clearing Instructions:

Press the learning button on the receiver eight times to clear all codes. After clearing, no remote controls will function.

Learning the Code:

Momentary Mode:

Press the learning key on the receiver once to enter momentary setting mode.

The LED will turn off briefly, indicating learning mode.

Press the remote button; the LED on the receiver will flash then turn off.

After 3 seconds, the LED will illuminate again, indicating successful learning.

Toggle Mode:

Press the learning key on the receiver twice to enter toggle setting mode.

The LED will turn off briefly, indicating learning mode.

Press the remote button; the LED on the receiver will flash then turn off.

After 3 seconds, the LED will illuminate again, confirming successful learning.

Latching Mode:

Press the learning key on the receiver three times to enter latching mode.

The LED on the receiver will flash briefly, indicating learning mode.

Press remote button A; the LED will flash five times.

Press remote button B; the LED will flash five times.

After 3 seconds, the LED will illuminate again, confirming successful learning. A = ON, B = OFF.

Package Includes:

2 x Remote Control Transmitters (battery not included)

1 x Remote Receiver Module (including Shell)

What's in the box
2 x Remote Control Transmitters (battery not included)
1 x Remote Receiver Module
1 x Shell for Module