WVS 8CH Ethernet Digital I/O Module Modbus RTU TCP PoE

WVS 8CH Ethernet Digital I/O Module Modbus RTU TCP PoE

R 891.00

Takealot · checked Yesterday

View at Takealot
Average
R 1 222.99
Lowest seen
R 889.00
Highest seen
R 1 499.00
Last change
R 2.00
First indexed
23 Sep 2026
Retailer
Takealot

Description

The WVS 8CH Ethernet Digital I/O Module is an industrial-grade 8-channel digital input and 8-channel digital output module designed for remote monitoring, control and automation applications. With support for both Modbus RTU and Modbus TCP, the module can communicate with industrial controllers, computers and automation systems over serial or Ethernet-based networks.

The module features dual Ethernet interfaces, with PoE support through an Ethernet port, allowing network communication and power to be provided through a compatible PoE network connection. It can also be powered using a DC 5.5 × 2.1 mm power jack or a screw terminal with a wide 7-36V DC input range.

The 8 digital inputs support both passive and active input configurations, including dry-contact and wet-contact signals as well as NPN and PNP types. Bidirectional optocoupler isolation provides electrical separation, while an integrated debouncing algorithm helps provide stable input detection.

The 8 digital outputs use optocoupler isolation and Darlington transistor circuitry for increased driving capability. Each output supports up to 500mA sink current, with integrated flyback diode protection. The outputs also support automatic timed flash-on and flash-off functions, allowing an output to be activated for a specified period and then switched off automatically.

Built-in protection features include power isolation, optocoupler isolation, resettable fuse protection and TVS protection, helping improve reliability in industrial environments.

The module uses a DIN rail-mount case design for convenient installation inside control panels, automation cabinets and other industrial electrical systems. Onboard LED indicators provide visual feedback for power, MCU operation, Ethernet connections, data transmission, data reception and digital I/O status.

Key Features
  • 8-channel digital input and 8-channel digital output
  • 8DI / 8DO isolated digital I/O
  • Supports Modbus RTU
  • Supports Modbus TCP
  • Dual Ethernet interfaces
  • Supports PoE power supply
  • IEEE 802.3af PoE support
  • Wide DC 7-36V power input
  • Supports DC 5.5 × 2.1 mm power jack
  • Screw-terminal power connection
  • Supports passive and active digital inputs
  • Supports dry-contact and wet-contact inputs
  • Supports NPN and PNP input types
  • Bidirectional optocoupler isolation on digital inputs
  • Built-in input debouncing algorithm
  • Relay/output linkage or toggle control
  • Optocoupler-isolated digital outputs
  • Darlington transistor output design
  • Up to 500mA sink current per output
  • Built-in flyback diode protection
  • Flash-on and flash-off output functions
  • Onboard power isolation
  • Resettable fuse protection
  • TVS protection
  • DIN rail-mount case
  • Onboard status and communication LEDs
  • Suitable for industrial automation and remote I/O applications
Technical Specifications
  • Product Type: Ethernet Digital I/O Module
  • Digital Inputs: 8DI
  • Digital Outputs: 8DO
  • Supply Voltage: DC 7-36V
  • Power Supply Methods: PoE Ethernet, DC 5.5 × 2.1 mm power jack or screw terminal
  • PoE Standard: IEEE 802.3af
  • Communication Interface: Ethernet
  • Ethernet Ports: 2
  • Digital Input Voltage: 5-36V
  • Digital Input Type: Dry contact / wet contact
  • Input Compatibility: NPN or PNP
  • Input Isolation: Bidirectional optocoupler
  • Digital Output Voltage: 5-40V
  • Output Type: Open-drain
  • Maximum Output Sink Current: 500mA per channel
  • Output Isolation: Optocoupler
  • Output Protection: Flyback diode
  • Communication Protocols: Modbus RTU and Modbus TCP
  • Mounting: DIN rail
  • Weight: 0.212kg
Digital Inputs

The module provides 8 isolated digital inputs designed to accept both passive and active signals. Input voltage is supported from 5V to 36V, with compatibility for dry-contact and wet-contact configurations.

The inputs support both NPN and PNP signal types, providing flexibility when connecting sensors, switches and other industrial input devices.

Each input uses bidirectional optocoupler isolation, helping separate the field-side signal from the module's control electronics. An integrated debouncing algorithm is also provided to help prevent unwanted rapid changes caused by mechanical contacts or signal noise.

Digital Outputs

Eight isolated digital outputs provide control of external loads and devices. The outputs use a Darlington transistor configuration with optocoupler isolation to provide enhanced driving capability.

Each channel can sink up to 500mA, with an output operating range of 5-40V. Built-in flyback diode protection helps protect the output circuitry when controlling suitable inductive loads.

The outputs can be used for switching and automation tasks, with support for linkage, toggle and timed output functions.

Flash-On and Flash-Off Functions

The module supports flash-on and flash-off functions, allowing an output to be switched on for a defined period before automatically switching off.

This functionality can be useful for applications such as:

  • Timed control
  • Indicator operation
  • Pulse outputs
  • Automatic switching
  • Actuator control
  • Industrial automation sequences

The timing behaviour can be configured by passing the appropriate parameters through the supported command interface.

Modbus Communication

The module supports both Modbus RTU and Modbus TCP, allowing it to integrate with different automation architectures.

Modbus RTU provides communication for compatible serial-based control systems, while Modbus TCP allows the module to communicate over an Ethernet network.

This makes the module suitable for remote digital I/O control from compatible industrial controllers, computers, automation software and networked control systems.

Ethernet and PoE

The module features two Ethernet ports and supports PoE using the IEEE 802.3af standard. A compatible PoE network connection can provide power to the module while also providing network communication.

Alternative power options include:

  • DC 7-36V screw-terminal input
  • DC 5.5 × 2.1 mm power jack
  • PoE Ethernet connection

This provides flexibility when integrating the module into existing control cabinets and network installations.

Protection Features

The module incorporates several protection features intended to improve reliability in industrial and automation applications, including:

  • Power supply isolation
  • Optocoupler isolation
  • Resettable fuse
  • TVS protection
  • Flyback diode protection on outputs

These features provide additional protection between the control electronics and connected field devices.

LED Indicators

The onboard LEDs provide convenient visual information about the module's operating and communication status.

  • RUN LED: Indicates Ethernet port operation. When the Ethernet port is operating normally, it outputs a square wave with a 2-second period.
  • STA LED: Indicates MCU operation and flashes when the MCU is operating normally.
  • TXD LED: Illuminates during data transmission.
  • RXD LED: Illuminates during data reception.
  • Left Port Green LED: Indicates that Ethernet Port 1 is connected to an Ethernet network.
  • Right Port Green LED: Indicates that Ethernet Port 2 is connected to an Ethernet network.
  • Left Port Yellow LED: Indicates that a TCP connection has been established and can be used to check the communication link with host software.
  • Right Port Yellow LED: Indicates Ethernet data activity and changes state when data is transmitted.
DIN Rail Installation

The module is housed in a DIN rail-mount case, making it suitable for organised installation inside industrial control panels, electrical cabinets and automation systems.

The rail-mount design provides a convenient way to install the module alongside other DIN-mounted controllers, power supplies, relays and automation equipment.

Applications

The WVS 8CH Ethernet Digital I/O Module is suitable for:

  • Industrial automation
  • Remote I/O control
  • Ethernet-based control systems
  • Modbus TCP applications
  • Modbus RTU applications
  • Factory automation
  • Machine control
  • Control panels
  • Industrial monitoring
  • Remote sensor monitoring
  • Digital sensor interfaces
  • Actuator control
  • Relay and switching applications
  • Building automation
  • Smart control systems
  • PLC and computer-based automation
  • Networked monitoring systems
Package Contents
  • 1 × WVS Modbus PoE ETH IO 8CH Module
  • 1 × Screwdriver
Important Notes
  • The module requires a DC 7-36V supply when using the DC power input.
  • When using PoE, the network equipment must support IEEE 802.3af.
  • Digital input signals must be within the specified 5-36V input range.
  • Digital outputs support 5-40V and up to 500mA sink current per channel.
  • Ensure connected devices and loads are compatible with the module's electrical specifications.
  • The module supports both Modbus RTU and Modbus TCP, but the appropriate communication configuration is required for the selected interface.
  • An adequate power supply is particularly important when multiple outputs are operating simultaneously.

What's in the box
1 x WVS 8CH Ethernet Digital I/O Module Modbus RTU TCP PoE