XELVORI 1600A Car Jump Starter with 150 PSI Tyre Inflator & Power Bank

1. 1600A Peak 12V Jump Starter

Provides up to 1600A peak current and 800A starting current for emergency starting assistance with compatible 12V vehicle batteries. Starting performance may vary according to the vehicle, battery condition, temperature and remaining device charge. Not suitable for 24V vehicle systems.

2. Built-In 150 PSI Tyre Inflator

Check and inflate compatible car, motorcycle and bicycle tyres from one compact device. The digital display helps you monitor pressure while inflating. The 150 PSI figure is the unit's maximum pressure rating; always follow the pressure recommended by the vehicle or tyre manufacturer.

3. 4-in-1 Roadside Emergency Device

Combines four useful vehicle backup functions in one portable unit:

- 12V car jump starter

- 150 PSI air compressor

- Dual USB power bank

- Emergency LED light

Suitable for keeping in your vehicle for roadside emergencies, travel and everyday backup.

4. Digital Pressure and Battery Display

The integrated display shows the remaining battery level and inflation pressure. Select the required inflation mode or pressure unit and adjust the target pressure using the built-in controls.

5. Dual USB Backup Power

Two 5V/2A USB outputs can charge compatible USB-powered devices such as mobile phones, tablets, cameras and earphones when access to mains power is unavailable. Charging cables for external devices are not included.

6. Emergency LED Lighting

The built-in LED light provides steady, flashing and SOS modes for night-time vehicle checks, low-light roadside situations and emergency signalling.

7. Smart Jumper Clamps

The supplied intelligent jumper clamps provide connection-status guidance and warn of incorrect polarity. Always connect the red clamp to positive and the black clamp to negative before attempting to start the vehicle.

Specifications

- Brand: XELVORI

- Product Type: 4-in-1 Car Jump Starter with Air Compressor

- Compatible Vehicle System: 12V

- Starting Current: 800A

- Peak Current: 1600A

- Maximum Rated Inflation Pressure: 150 PSI

- Pressure Display Accuracy: 0.1 BAR

- Charging Input: 5V/2A

- USB Outputs: 2 × 5V/2A

- Charging Time: Approximately 4-5 hours

- LED Modes: Steady / Flash / SOS

- Working Temperature: -20 C to 60 C

- Product Dimensions: Approximately 192 × 85 × 63 mm

What's in the Box

- 1 × XELVORI jump starter

- 1 × Smart jumper clamp cable with reverse-polarity warning

- 1 × Air hose

- 1 × Set of 3 nozzle adapters

- 1 × USB Type-C charging cable

- 1 × Storage bag

- 1 × User manual

Fully charge, ensure >75 before starting.

12V only no 24.

correct polarity, no contact.

attempt max3 sec, wait 2 min, max3 consecutive.

compressor warm, allow cool, recommended pressure.

Maybe storage recharge monthly >50. That's 6 combine.

What's in the box
1 x XELVORI jump starter
1 x Smart jumper clamp cable with reverse-polarity warning
1 x Air hose
1 x Set of 3 nozzle adapters
1 x USB Type-C charging cable
1 x Storage bag
1 x User manual