Car Paint Thickness Gauge, Fe & NFe Probe Coating Thickness Gauge Meter

Car Paint Thickness Gauge. This Paint Thickness Gauge Is Mainly Used To Measure The Thickness Of Non-Conductive Coating On Metal surfaces, As Well As The Thickness Of Non-Ferromagnetic Coating On Ferromagnetic Metal (Iron, Nickel, Cobalt, etc), Paint Thickness On Automobile surfaces, Coating Thickness Of Metal Parts, Etc. Perfect For Amateurs And Professionals In Manufacturing, Workshops, Paint Shops, And Automobiles.

Automatically Identify Substrate With 3 Mode, (Auto) Mode,(F) Mode,(N) Mode, This Coating Thickness Gauge Meter Also Has Built-In Magnetic Induction And Vortex Double Principle Probe, Can Automatically Identify The Measured Metal Substrate, Only Need To Be Placed On The Measured Surface, Can Automatically Calculate The Thickness Of The Coating.

Record A Variety Of Data Paint Thickness Gauge Can Record The Average Value, Maximum Value, Minimum Value, Dif At The Same Time, And Support Up To 50 Data For Statistics, So That The Numerical Data You Measure Is More Accurate And Convenient.

3 Measurement Units& Backlight Coating Thickness Gauge Have Three Units Of Micron, Millimeter, And Mils Can Be Cut Through The Button, Which Can Quickly And Accurately Measure The Coating Or Electroplating Thickness On Almost All Metal Surfaces. The Paint Meter has a High-Definition Display Screen with a Background Light. It Is Easy To Read Data When You Are In Any Venue, Can Be Placed Anywhere, and is Easy To Carry.

Zero Calibration & Troubleshooting To Improve The Test Accuracy, It Is Suggested That The Instrument Should Be Calibrated To Zero. If A Significant Anomaly Is Found In The Instrument, The User Can Unplug The Battery For 2 Seconds, Reinstall The Battery, And Then Boot And Try Again.

Specification :

Probe :AUTO,F probe, N probe(FE/NFE).

Measuring principle: Magnetic induction, Eddy current effect.

Measuring range:0~2000um.

Precision: (3%+1um).

Resolution: 0um~999um (1um).

Statistics: Average, minimum, maximum, number.

Unit:um,mm,mils

Power supply:2x1.5V 7 battery

Zero calibration :

Support. Minimum convex Radian:5mm.

Minimum concave Radian:25mm.

Minimum measured area:Diameter 20mm.

Minimum substrate thickness:0.2mm,0.05mm.

Maximum measuring speed:2 readings per second.

Operating environment:Temperature:0 ~ 50 C 20 ~ 90%rh (non-condensed),

Preservation environmen:Temperature:-10 ^ 60 C,20 ^ 90%rh (non-condensation).

Measurement Step

Step 1. Prepare the parts to be tested.

Step 2. Stay away from the metal object at least 2 cm, and press the switch key to turn on. Note: it is suggested that the instrument should be zeroed with reference to " zero calibration; before testing.

Step 3. The probe is placed vertically and quickly on the surface to be measured until the drop is heard, and the measured value is displayed on the screen. And then the probe is lifted at least 2 cm away from the part to be measured, and the next measurement can be carried out. Note: if the automatic shutdown function is turned on and there is no operation within 3 minutes, the instrument will automatically shut down.

What's in the box
1x Coating Thickness Gauge
1x Lanyard
6x Calibration film (0.05 0.25/0.10/0.50/1.00/2.00mm)
1x Substrate
1x Instruction manual