Deadtree Splitter Digital Inflator/Deflator Hose Kit 2 Wheel

Airing down at the start of a trail and pumping back up at the end are the two jobs that eat the most time on a day out, and doing them one wheel at a time, crouching at each corner with a gauge, is why plenty of people run the wrong pressure all day. The Splitter does two tyres at once. One hose to each wheel, one digital head in your hand, and both corners come up or down together off a single reading. Two operations instead of four, and the pair always ends up matched, which is what actually keeps a 4x4 tracking straight in sand. The head reads 0-250 PSI in 0.1 PSI steps to within 1%, on a 1.6" LCD with a blue backlight that stays readable at dusk or under a bonnet at night. There's a top-mounted work light on a single button push, running roughly 200 hours off two AAA cells, so you're not holding a torch in your teeth at a river crossing. Everything downstream is built for the conditions: heavy-duty rubber hoses long enough to reach both tyres on a 5m wheelbase, brass fittings, a rubber bump guard round the head, and a leak-proof seal throughout. The 1/4" M-Style connector plugs straight onto most compressors, with no adapters to lose.

Specifications

- Configuration: 2-wheel splitter (dual hose)

- Pressure range: 0-250 PSI / 0-17 BAR / 0-1700 kPa / 0-17 kg/cm2

- Graduations: 0.1 PSI

- Accuracy: +/- 1%

- Maximum operating pressure: 300 PSI

- Display: 1.6" LCD, blue backlight

- Work light: built-in, single-button

- Battery: 2 x AAA (up to approx. 200 hours)

- Inlet fitting: 1/4" MNPT M-Style

- Hose reach: vehicles up to 200" (5.08 m) wheelbase

- Hose material: heavy-duty rubber

- Fittings: brass

- Housing protection: rubber bump guard

Features

- Two tyres at a time: inflate or deflate both together, off one gauge reading

- 0.1 PSI graduations, +/- 1% accuracy across a 0-250 PSI range

- 1.6" blue-backlit LCD with large digits, readable day or night

- Built-in top work light on a single button, around 200 hours from two AAA batteries

- Extended hoses reach both tyres on vehicles up to a 5m wheelbase

- 1/4" M-Style MNPT fitting, plug-and-play with ARB, PowerTank and most compressors

- Heavy-duty rubber hoses and brass fittings, leak-proof under pressure

- Rubber bump guard protects the gauge head against knocks and drops

- Reads PSI, BAR, kPa and kg/cm2, switchable units

- Suits everything from bicycles to trucks: cars, bakkies, 4x4s, ATVs, motorcycles, trailers

- Carry bag included to keep the kit together in the load bin

What's in the box
1 x Deadtree Splitter Digital Gauge Head
2 x Extended Rubber Hoses with Brass Tyre Chucks
1 x Carry Bag