Deadtree Splitter Digital Inflator/Deflator Hose Kit 4 Wheel

Airing down at the start of a trail and pumping back up at the end are the two jobs that eat the most time on a day out, and doing them one wheel at a time, crouching at each corner with a gauge, is why plenty of people run the wrong pressure all day. The Splitter 4 Wheel does the whole vehicle at once. One chuck on each wheel, one digital head in your hand, and all four corners come up or down together off a single reading. One operation instead of four, and every tyre ends up matched, which is what actually keeps a 4x4 tracking straight in sand. The head reads 0-250 PSI in 0.1 PSI steps to within 1%, on a 1.6" LCD with a blue backlight that stays readable at dusk or under a bonnet at night. There's a top-mounted work light on a single button push, running roughly 200 hours off two AAA cells, so you're not holding a torch in your teeth at a river crossing. Everything downstream is built for the conditions: heavy-duty rubber hoses long enough to reach all four tyres on a 5m wheelbase, brass fittings, a rubber bump guard round the head, and a leak-proof seal throughout. The 1/4" M-Style connector plugs straight onto most compressors, with no adapters to lose.

Specifications

- Configuration: 4-wheel splitter (four tyre chucks)

- Pressure range: 0-250 PSI / 0-17 BAR / 0-1700 kPa / 0-17 kg/cm2

- Graduations: 0.1 PSI

- Accuracy: +/- 1%

- Maximum operating pressure: 300 PSI

- Display: 1.6" LCD, blue backlight

- Work light: built-in, single-button

- Battery: 2 x AAA (up to approx. 200 hours)

- Inlet fitting: 1/4" MNPT M-Style

- Hose reach: vehicles up to 200" (5.08 m) wheelbase

- Hose material: heavy-duty rubber

- Fittings: brass

- Housing protection: rubber bump guard

Features

- All four tyres at once: inflate or deflate the whole vehicle together, off one gauge reading

- 0.1 PSI graduations, +/- 1% accuracy across a 0-250 PSI range

- 1.6" blue-backlit LCD with large digits, readable day or night

- Built-in top work light on a single button, around 200 hours from two AAA batteries

- Extended hoses reach all four tyres on vehicles up to a 5m wheelbase

- 1/4" M-Style MNPT fitting, plug-and-play with ARB, PowerTank and most compressors

- Heavy-duty rubber hoses and brass fittings, leak-proof under pressure

- Rubber bump guard protects the gauge head against knocks and drops

- Reads PSI, BAR, kPa and kg/cm2, switchable units

- Suits everything from bicycles to trucks: cars, bakkies, 4x4s, ATVs, motorcycles, trailers

- Carry bag included to keep the kit together in the load bin

What's in the box
1 x Deadtree Splitter Digital Gauge Head
1 x Extended Rubber Hose Set with 4 x Brass Tyre Chucks
1 x Carry Bag