H4 3-Pin 200W 20000LM LED Headlight Bulbs High Low Beam 6000K

Upgrade from standard halogen lighting to brighter, clearer road illumination with these H4 3-Pin LED Headlight Bulbs. Designed for compatible vehicles using an H4/P43t headlight fitting, the bulbs combine high and low beam functionality into one compact LED unit.

Producing a combined rated output of 200W per pair and up to 20,000 lumens per pair, these headlights provide powerful forward illumination for improved visibility when driving at night and in low-light conditions.

The 6000K-6500K daylight-white colour temperature creates a clean, modern appearance while helping illuminate road markings, signs and potential hazards more clearly. The focused LED configuration is designed to provide controlled light distribution and a defined beam pattern when correctly installed in a compatible headlight housing.

For reliable long-term operation, each bulb incorporates a high-speed cooling fan and aviation-grade aluminium housing to rapidly dissipate heat. The compact all-in-one construction also simplifies installation by eliminating bulky external cooling components.

KEY FEATURES

• H4 3-Pin / P43t Fitment - Designed as an LED replacement for compatible H4 halogen headlight bulbs
• High & Low Beam Functionality - Both beam functions are integrated into each bulb
• 20,000LM Rated Output - Powerful combined illumination from the pair
• 200W Rated Power - 100W per bulb / 200W per pair
• 6000K-6500K White Light - Crisp daylight-style illumination with a modern appearance
• Up to 400% Brighter - Designed to provide a significant visibility upgrade compared with conventional halogen lighting
• Long-Range Illumination - Designed to project useful illumination further down the road, with claimed reach of up to approximately 300m under suitable conditions
• Precision Beam Design - Engineered for focused light distribution and a defined cutoff when correctly fitted
• Integrated Cooling Fans - High-speed active cooling helps regulate LED operating temperature
• Aluminium Construction - Aviation-grade aluminium assists with efficient heat dissipation
• 30,000+ Hour Rated Lifespan - Designed for extended operating life
• IP67/IP68 Weather Protection - Sealed construction provides resistance against water and dust
• Plug-and-Play Installation - Standard H4 connection requires no cutting or additional wiring on most compatible vehicles
• 12V/24V DC Compatibility - Suitable for many compatible passenger and light commercial vehicle electrical systems
• Compact All-in-One Design - Helps simplify installation in compatible headlight housings

TECHNICAL SPECIFICATIONS

Bulb Type: H4 LED
Base Type: H4 / P43t
Connector: 3-Pin
Beam Function: High Beam + Low Beam
Rated Power: 200W per pair
Rated Power Per Bulb: 100W
Rated Light Output: 20,000LM per pair
Colour Temperature: 6000K-6500K
Light Colour: Daylight White
Cooling System: Integrated High-Speed Fan
Housing Material: Aviation-Grade Aluminium
Weather Protection: IP67/IP68
Operating Voltage: 12V/24V DC
Rated Lifespan: 30,000+ Hours
Installation Type: Plug-and-Play
Quantity: 2 Bulbs

VEHICLE COMPATIBILITY

These bulbs are intended for vehicles that use an H4 / HB2 / 9003-style 3-pin headlight fitting for combined high and low beam operation.

H4 bulbs are commonly found on selected variants of vehicles from manufacturers including:

• Toyota
• Volkswagen
• Nissan
• Ford
• Mazda
• Mitsubishi
• Isuzu
• Suzuki
• Hyundai
• Kia
• Honda
• Renault
• Chevrolet
• Mahindra
• GWM
• Chery
• Selected passenger vehicles, SUVs, bakkies and light commercial vehicles

IMPORTANT: This list is a general guide only and does NOT guarantee compatibility.

Bulb fitment can differ according to vehicle model, year, trim level, headlight assembly and market specification, even between vehicles of the same model.

IMPORTANT FITMENT CHECK BEFORE ORDERING

Please check your existing bulb before purchasing.

Your vehicle should have:

• An H4 / P43t compatible bulb socket
• A 3-pin electrical connector
• Combined high and low beam functionality through the H4 bulb
• Sufficient space behind the headlight for the LED bulb and integrated cooling fan

Do not purchase based only on the vehicle make or model.

Some vehicles may use H4 bulbs on one model year or trim level and H7, H11, HB3, HB4 or another fitting on a different version.

For the most reliable confirmation, remove the existing bulb and check the fitting code printed on its base or consult the vehicle owner's manual before ordering.

CANBUS & DASHBOARD WARNING

These bulbs are designed to operate with many standard vehicle electrical systems; however, full CANbus error-free compatibility is not guaranteed for every vehicle.

Vehicles with sensitive bulb-monitoring systems may experience:

• Dashboard bulb warnings
• LED flickering
• Lights switching off unexpectedly
• Hyper-flashing or electrical monitoring errors

A separate CANbus decoder, anti-flicker module or load resistor may be required for certain vehicles. These accessories are not included.

INSTALLATION GUIDANCE

1. Switch off the vehicle and headlights before installation.
2. Disconnect the battery where appropriate.
3. Remove the existing H4 halogen bulb.
4. Confirm that the original fitting uses the same H4 3-pin connection.
5. Install the LED bulb securely into the headlight housing.
6. Connect the factory H4 plug.
7. Confirm both high and low beam operation before closing the headlight assembly.
8. Check beam alignment after installation and adjust the headlights where necessary.

If a bulb does not illuminate after connection, switch off the power before checking the connector and polarity.

Professional installation is recommended if you are unsure about bulb compatibility, headlight adjustment or vehicle wiring.

MAINTENANCE & CARE

• Always switch off the lights and vehicle before inspecting or removing the bulbs.
• Avoid touching the LED chip components unnecessarily.
• Keep electrical connectors clean, dry and securely connected.
• Periodically inspect the bulb and wiring for loose connections.
• Keep the integrated cooling fan and ventilation area clear of dust and debris.
• Do not obstruct the cooling fan during installation.
• Ensure the bulb is firmly seated to maintain the correct beam pattern.
• Inspect headlight alignment after installation.
• Do not pressure-wash directly into an open or unsealed headlight housing.
• If flickering or dashboard warnings develop, check connections and determine whether the vehicle requires an additional CANbus decoder.

FREQUENTLY ASKED QUESTIONS

Q: Are these H4 bulbs 3-pin?
Yes. They use the standard H4/P43t-style 3-pin connection.

Q: Do they provide both high and low beam?
Yes. H4 is a dual-beam configuration, allowing each bulb to provide both high and low beam functions in compatible headlights.

Q: What colour is the light?
The bulbs produce approximately 6000K-6500K daylight-white illumination.

Q: Is the 200W rating for one bulb?
No. The stated rating is 200W per pair / 100W per bulb.

Q: Is the 20,000LM rating per bulb?
No. The stated light output is 20,000 lumens per pair.

Q: Will these fit my vehicle?
Only if your vehicle uses a compatible H4/P43t 3-pin headlight fitting and has sufficient physical clearance. Check your existing bulb or owner's manual before ordering.

Q: Will they fit every vehicle listed in the compatibility section?
No. Vehicle manufacturers can use different bulb types depending on year, model, trim and headlight configuration. The compatibility list is only a general reference.

Q: Are they plug-and-play?
Installation is plug-and-play on most compatible H4 applications, but some vehicles may require additional adapters, retainers or CANbus components.

Q: Will they cause a dashboard error?
Not necessarily, but vehicles with sensitive bulb-monitoring systems may require a separate CANbus decoder or anti-flicker module.

Q: Do the bulbs have cooling fans?
Yes. Each bulb incorporates an active high-speed cooling fan.

Q: Are they waterproof?
The bulbs feature a rated IP67/IP68 water- and dust-resistant construction. The vehicle's complete headlight assembly must still be correctly sealed.

Q: Can they be used on 24V vehicles?
They are specified for 12V/24V DC systems, provided the vehicle uses the correct H4 fitting and the installation is otherwise compatible.

TAKEALOT ATTRIBUTES

Product Type: LED Headlight Bulbs
Bulb Fitment: H4 / P43t
Connector Type: 3-Pin
Beam Type: High & Low Beam
Light Technology: LED
Light Colour: White
Colour Temperature: 6000K-6500K
Rated Power: 200W per Pair
Rated Luminous Output: 20,000LM per Pair
Voltage: 12V/24V DC
Cooling Type: Integrated Fan
Housing Material: Aluminium
Weather Resistance: IP67/IP68
Installation: Plug-and-Play on Compatible Vehicles
Vehicle Application: Compatible Cars, SUVs, Bakkies & Light Commercial Vehicles

What's in the box
2 x H4 3-Pin LED Headlight Bulbs with Integrated Cooling Fans
1 x User Manual