H7 2-Pin 200W 20000LM LED Headlight Bulbs 6000K Super Bright 12V 24V Pair

Upgrade your vehicle lighting with these H7 2-Pin 200W LED Headlight Bulbs, delivering a combined output of 20,000 lumens for powerful night-time illumination.

Producing a crisp 6000K daylight-white light, the bulbs provide clearer road visibility and a modern appearance. Built-in high-speed cooling fans and aluminium housings help manage heat for reliable long-term performance.

Designed for compatible H7 headlight systems operating on 12V or 24V DC.

KEY FEATURES

• H7 LED headlight bulbs
• 2-pin H7 fitting
• 200W total power
• 100W per bulb
• 20,000LM combined output
• 6000K daylight-white light
• Up to 300m claimed light projection
• Focused beam design
• Built-in high-speed cooling fans
• Aviation-grade aluminium housing
• Over 30,000-hour rated lifespan
• IP67/IP68 weather-resistant construction
• 12V and 24V DC compatibility
• Plug-and-play design
• Supplied as a pair

20000LM HIGH-BRIGHTNESS OUTPUT

The pair delivers a combined rated output of 20,000 lumens, providing significantly brighter illumination than conventional halogen lighting.

Improved road visibility helps you identify road markings, obstacles and surrounding conditions more clearly at night.

6000K DAYLIGHT WHITE

The 6000K daylight-white colour temperature provides crisp, modern-looking illumination without the yellow appearance of traditional halogen bulbs.

Specified operating colour range is approximately 6000K-6500K.

200W HIGH-POWER PERFORMANCE

Total rated power output is 200W per pair, equivalent to 100W per bulb.

The high-output LED design provides instant illumination for improved night-time road visibility.

ADVANCED COOLING SYSTEM

Each bulb features a built-in high-speed cooling fan combined with an aviation-grade aluminium housing.

This system rapidly transfers heat away from the LED components to help maintain stable performance and extend operating lifespan.

FOCUSED BEAM DESIGN

The LED arrangement is designed to provide concentrated road illumination with a defined beam pattern when correctly installed and aligned.

Correct bulb positioning and headlight alignment are essential for optimum visibility and to minimise unnecessary glare.

WEATHER-RESISTANT CONSTRUCTION

The bulbs feature IP67/IP68-rated waterproof and dust-resistant construction for reliable operation in demanding driving conditions.

Correct installation and sealing of the vehicle's headlight housing remain important for weather protection.

TECHNICAL SPECIFICATIONS

Product Type: LED Headlight Bulbs
Bulb Type: H7
Base Type: PX26d
Connector: 2-Pin
Light Source: LED
Rated Brightness: 20,000LM per Pair
Rated Power: 200W per Pair
Power Per Bulb: 100W
Colour Temperature: 6000K-6500K
Primary Light Colour: 6000K Daylight White
Claimed Projection Distance: Up to 300m
Voltage: 12V / 24V DC
Cooling: Built-In High-Speed Fan
Housing: Aviation-Grade Aluminium
Rated Lifespan: Over 30,000 Hours
Weather Protection: IP67/IP68
Installation: Plug-and-Play
Beam Type: Single Beam
Quantity: 2 Bulbs / 1 Pair

H7 SINGLE-BEAM INFORMATION

H7 is generally a single-beam bulb fitting.

Depending on your vehicle, H7 may operate as:

• Low beam
• High beam
• Another dedicated lighting position

Some vehicles use separate H7 bulbs for high and low beam.

Confirm exactly which position uses H7 before purchasing.

VEHICLE COMPATIBILITY

Suitable for compatible vehicles using H7 / PX26d headlight bulbs.

H7 bulbs are commonly found in selected models from manufacturers such as:

• Volkswagen
• Audi
• BMW
• Mercedes-Benz
• Ford
• Toyota
• Nissan
• Hyundai
• Kia
• Mazda
• Honda
• Renault
• Peugeot
• Opel

Compatibility varies significantly between model years, trims and headlight configurations.

IMPORTANT FITMENT WARNING

Do not purchase based only on vehicle make and model.

Before ordering, confirm:

• Existing bulb is H7
• Bulb uses the correct 2-pin connection
• H7 is used in the position you want to replace
• Sufficient space exists behind the headlight
• Existing retaining system can secure the LED bulb
• Vehicle operates on a compatible 12V or 24V DC system

Some vehicles may require additional H7 retaining adapters or clips.

SIZE & CLEARANCE NOTICE

The integrated cooling fan makes these LED bulbs larger behind the mounting point than many standard halogen bulbs.

Check for sufficient:

• Rear headlight depth
• Dust-cover clearance
• Cooling ventilation
• Wiring clearance
• Bulb retaining clearance

An H7 socket alone does not guarantee physical fitment.

CANBUS COMPATIBILITY NOTICE

Some vehicles electronically monitor the headlight circuit and may require an additional CANbus decoder or anti-flicker module.

Without the correct decoder, some vehicles may experience:

• Dashboard bulb warnings
• Flickering
• Flashing
• Bulb error messages
• Lights switching off

CANbus decoder is not included.

INSTALLATION GUIDANCE

• Switch off the engine and headlights
• Disconnect the battery where recommended
• Confirm the existing bulb is H7
• Remove the original bulb carefully
• Install the LED bulb securely
• Confirm correct polarity
• Ensure the cooling fan has enough space
• Test the light before closing the housing
• Check beam alignment after installation

If the bulb does not illuminate, switch off the power before checking the connector orientation.

Professional installation is recommended if you are unsure about fitment.

MAINTENANCE & CARE

• Keep headlight lenses clean
• Keep cooling fans free from dirt and debris
• Inspect electrical connections periodically
• Do not touch or damage the LED chips
• Keep wiring away from excessive heat
• Ensure bulbs remain securely mounted
• Check beam alignment after installation
• Inspect cooling fans periodically
• Replace bulbs as a pair for balanced lighting

FREQUENTLY ASKED QUESTIONS

What fitting are these bulbs?
They use an H7 / PX26d fitting.

What is the total brightness?
The pair is rated at 20,000 lumens combined.

What is the power output?
Total rated power is 200W per pair / 100W per bulb.

What colour are the headlights?
They produce approximately 6000K daylight-white light, with a specified range of 6000K-6500K.

Do they have cooling fans?
Yes. Each bulb has a built-in high-speed cooling fan.

Do they work on 12V vehicles?
Yes. They support compatible 12V DC systems.

Do they work on 24V vehicles?
Yes. They are specified for compatible 12V and 24V DC systems.

Are H7 bulbs high and low beam?
H7 is generally a single-beam fitting. Your vehicle determines whether the bulb is used for high beam or low beam.

Will these fit every vehicle using H7?
Not necessarily. Physical clearance, bulb holders and vehicle electronics can vary even when the original bulb is H7.

Will I need an H7 adapter?
Some vehicles use specialised retaining clips or holders and may require an additional vehicle-specific adapter.

Will I need a CANbus decoder?
Some vehicles may require a separate decoder to prevent flickering or dashboard errors.

Are CANbus decoders included?
No. A separate decoder must be purchased if required by your vehicle.

What's in the box
2 x H7 LED Headlight Bulbs (with integrated cooling fans)
1 x User Manual