Max Pump 0.75 kW Jet Booster Water Pump (Stainless Steel) - Self-Priming, High Head, Automatic Pressure

Reliable Automatic Pressure for Home and Garden from MAX PUMP

 

The MAX PUMP 0.75kW Stainless Steel Jet Booster Pump is a robust, self-priming centrifugal pump designed for residential and light industrial water management. It is engineered to efficiently draw clean water from shallow sources like wells, cisterns, or tanks and reliably boost water pressure throughout the system.

This model is a complete booster solution, often including an automatic pressure control switch (Flow Control) that starts the pump when a tap is opened and stops it when the tap is closed. This provides a constant, reliable water supply without the need for a large pressure tank. With a durable stainless steel pump body and a corrosion-resistant impeller, the pump is built for longevity and can achieve a maximum head of around 42-46 metres and a flow rate of up to 50 litres per minute. Its self-priming capability allows for suction lift up to 9 metres, even with air bubbles present.

  Key Benefits

• Self-Priming Capability: Excellent suction lift up to 9 metres for drawing water from wells or tanks.

• Durable Construction: Features a Stainless Steel (S/S) pump body for superior corrosion resistance.

• Automatic Operation: Often supplied as a kit with a Flow Control Switch for instant, demand-based operation.

• High Performance: Powered by a 0.75 kW (1 HP) motor, offering high pressure (head) for multi-story homes or long pipe runs.

• Built-in Protection: The automatic controller (when included) provides dry-run protection, safeguarding the motor.

  Technical Specifications

• Brand/Model: MAX PUMP Jet Booster Pump (JTS Model is common)

• Type: Self-Priming Centrifugal Jet Water Pump

• Nominal Power (P2): 0.75 kW (1 HP)

• Voltage: 220 V – 240 V / 50 Hz (Single-Phase)

• Max Flow Rate (Q Max): Approximately 50 l/min

• Max Head (H Max): Approximately 42 m to 46 m

• Max Suction Lift: Up to 9 m

• Pump Body Material: Stainless Steel

• Impeller Material: PPO or Brass

• Inlet/Outlet Connections: 1 inch (G1″)

• Max Working Pressure (Controller): 10 Bar (when included)

• Max Liquid Temp. (Controller): 60 degrees C (when included)

• Warranty: Typically 1 to 2 Years

   Ideal For

• Domestic Water Boosting: Increasing water pressure for showers, washing machines, and general household use.

• Garden and Lawn Irrigation: Providing high pressure for sprinkler systems.

• Rainwater/Tank Systems: Automatically drawing and pressurizing water from rain tanks or cisterns.

• Shallow Well Application: Suitable for lifting water from depths up to 9 metres.

  What's in the Box

• 1 x MAX PUMP 0.75kW Jet Water Pump (Stainless Steel Pump Body).

• 1 x Automatic Pressure Control Switch (Flow Control) (often included in the kit).

• 1 x Power Cable with plug.

• 1 x User Manual.

  Top 3 Frequently Asked Questions (FAQs)

1. Does the "S/S" stand for Stainless Steel?

   • Yes. "S/S" confirms the pump's casing (pump body) is made of Stainless Steel, which offers superior corrosion resistance compared to cast iron.

2. Is this pump ready to run automatically out of the box?

   • As a "Booster Pump," this model is almost always sold as a kit that includes the electronic Automatic Pressure Control Switch. Once plumbed in and primed, it should start and stop automatically when you open/close a tap.

3. What is the starting pressure of the automatic controller?

   • On standard controllers, the starting pressure is typically pre-set (e.g., 1.5 bar) and is usually non-adjustable. The pump will run until the tap is closed and the system pressure reaches the pump's maximum capability.