Ubiquiti UISP Wave 60GHz Point-to-MultiPoint Access Point WAVE-AP

Ubiquiti UISP Wave 60GHz Point-to-MultiPoint Access Point WAVE-AP Ubiquiti's WAVE-AP is a UISP 60GHz Point-to-MultiPoint Access Point featuring 5GHz failover, 1x 10Gbps SFP+ Port, 1x 2.5Gbps Ethernet Port and an integrated GPS antenna. Utilizing 60GHz point-to-multipoint technology, it can connect up to 15 stations with a total throughput of 5.4Gbps at distances of up to 1.3km when paired with the WAVE-PICO, 5km when paired with the WAVE-NANO, and 8km when paired with the WAVE-LR. Technical Specification Processor: Quad-core ARM Cortex-A53 at 1.4 GHz Memory: DDR3L 512 MB Networking interface 1x 2.5GbE RJ45 port (100/1000/2500)* (* Active only when SFP+ port is down.) 1x 10G SFP+ port (1/10) Max. power consumption: 24W Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only Power supply: 48V DC, 0.65A 2.5GbE PoE adapter (Included) Supported voltage range: 44–54V DC / 22–27V DC GPS: Yes Operating mode: PtMP access point Ubiquiti specific features: Wave technology Network: Bridge mode Total throughput: 5.4 Gbps (2.7 Gbps duplex) Max. range Connecting to a Wave Pro: up to 8 km Connecting to a Wave Long-Range: up to 8 km Connecting to a Wave Nano: up to 5 km Connecting to a Wave Pico: up to 1.3 km RF Operating frequency*: 57 - 71 GHz (*Depends on regulatory region.) Modulation: 16QAM, QPSK Antenna gain: 24 dBi Polarization: Vertically linear Beamwidth Azimuth: 3 dB 30° Elevation: 3 dB 3° Electrical downtilt: 0° Back-Up RF WiFi standard: 802.11ax (WiFi 6) Antenna gain: 12 dBi Cross-pol isolation: 10 dB Polarization: Dual-linear Beamwidth Azimuth: 3 dB 35° Elevation: 3 dB 60° Electric downtilt: 0° Enclosure material: Aluminum alloy, UV stabilized polycarbonate Pole mount diameter: 25 to 76 mm (1 to 3") on pipe outer diameter Wind loading: 98 N at 200 km/h Weatherproofing: IPX6 Weight: 2.3 kg