Ubiquiti UISP Wave NANO 60GHz Radio System with Integrated High-Gain Antenna WAVE-NANO

Ubiquiti UISP Wave NANO 60GHz Radio System with Integrated High-Gain Antenna WAVE-NANO Ubiquiti's WAVE-NANO is a 60GHz radio system with an integrated high-gain antenna, GPS, and a 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 12 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 5km) or WAVE-APM (4km) with a total throughput of up to 2Gbps. Technical Specification Processor: Dual-core ARM Cortex-A53 at 1 GHz Memory: DDR3L 512 MB Networking interface: 1x GbE RJ45 port Max. power consumption: 20W Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only Power supply 48V DC, 0.65A gigabit PoE adapter (Included) Can be powered by a UISP Router or UISP Switch Supported voltage range: 44–54V DC / 22–27V DC GPS: Yes Operating mode: PtMP station, PtP* (*FW version 3.2.0 and later.) Ubiquiti specific features: Wave AI, discovery protocol Tools: Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey* (*FW version 3.3.0 and later.) Network: Bridge/Router* mode (*Router is available in PtMP station mode only.) Total throughput: 2 Gbps (1 Gbps duplex) Max. range: 5+ km RF Operating frequency*: 57–71 GHz (*Depends on regulatory region.) Modulation: 16QAM, QPSK Antenna gain: 41 dBi Polarization: Vertically linear Beamwidth Azimuth: 3 dB 1.4° Elevation: 3 dB 1.4° Back-Up RF WiFi standard: 802.11ax (WiFi 6) Antenna gain: 19 dBi Polarization: Dual-linear Beamwidth Azimuth: 3 dB 14° Elevation: 3 dB 14° Cross-pol isolation: 20 dB